Beschreibung
Typical Applications
| Friction plates | Bearings | Sliders |
| High speed bearings | Forming dies |
Product availability and packaging
AMPCO-CORE® 250 is available from stock in two diameters: 0.045” (1.2mm) and 0,062” (1.6mm). Both sizes are available in 12″ (300mm) spools weighing 33lb (15 kg) each. Other diameters are available upon request.
Welding position and deposits
The flat welding position is recommended. Backhand (trailing) welding is preferred rather than forehand (pushing) to make either stringer or weaved beads.
Shielding gas
100% Argon
Operating conditions
| Current type | Gas flow rate | Intensity [A] | Voltage [V] | Stick-out [inch (mm)] |
| DC+ (DCEP) | 25 – 46 cfh (12-22 L/min) | 0.045″ (1.2 mm) 200-300 0.062″ (1.6 mm) 360-400 |
All diameters 28-30 | All diameters 5/8-1″ (15-25) |
AMPCO-CORE® 250
| Limiting Chemical Composition | |
| % (filler metal) | |
| Copper* | Balance |
| Aluminum | 11.5 |
| Iron | 4.0 |
| * including silver |
| Mechanical Properties | |
| (Nominal all-weld metal values) | |
| Hardness (HBW 10/3000) Three layer deposit on mild steel |
250 |
Document Download
AMPCO-CORE® 250 Technical Data Sheet
